To whom it may concern:

Qingdao JIERUIXIN Machinery and Technology Co.,LTD is the manufacture of the paper coating machine line with more than 20 years'experience.

For most customers it may be the first time choosing a paper coating machine line for usage.

Please do not worry, we will have the perfect pre-selling team who can provide some helpful suggestions for you.

First is about the base paper roll for the paper coating machine line used to produce the thermal paper.

You can find the paper factory to find which one kind of paper roll can be fit for being the base paper of the thermal paper coating machine line.

I can share some base paper characters with you.

While maybe paper making factory can help you figure out which is best to be the base paper, and they do not have too much learning of the paper data sheet.

This is our previous project for the thermal paper coating machine line We help customers to make sure which paper is fitting for the thermal paper coating machine line..

You can take this as a reference.

Important is about the paper smoothness and the paper pulp , better is chemical pulp

Pulp (paper pulp; pulp) is a fibrous substance obtained from plant fibers by different processing methods. It can be divided into mechanical pulp, chemical pulp and chemical mechanical pulp according to the processing method; it can also be divided into wood pulp, straw pulp, hemp pulp, reed pulp, sugarcane pulp, bamboo pulp, rag pulp and so on according to the fiber raw materials used. It can also be divided into refined pulp, bleached pulp, unbleached pulp, high-yield pulp, and semi-chemical pulp according to different purities.

(if you have found the base paper, and you are not so sure the base paper is fitting for your thermal paper making, you can send the paper sample in piece to us. We can do the test for you to check in )

Second is about the chemicals.

Our ready mixing chemical is in liquid station.

I will share with you our chemical mixing ratio with you. Chemical A and chemical B = 1:10

And about the chemical cost. Please check the table as follows.

Notice.  As you have checked one machine line , you can see we use 2 units of blade knife caoter unit to work.

There is needing the base coating, and the chemical coating.

Base coating is some kaolin clay caco3 latex, some low cost chemical.

It will be low cost.  And about these chemical mixing materials. Please do not worry, if you can buy the machine line, we can help you and give you the base coating chemical as free.

Chemical coating is what I told you yesterday.

The price is not stable. As you know the chemical price will change some times in one year time.

*The price is recently what we sold.

The price station is a white liquid station.

Considering your local condition in wintertime. You can also plan to mix chemicals and chemicals in your own factory.

And you also need to prepare the relevant office equipment and relevant lab equipment.

Please check these tests we did with our chemical formula during the production installation.

For the thermal paper preparation system. If you need to make the thermal paper material on your own. You need to prepare this part.

Fourth is about the thermal paper coating machine line part.

This machine line is at high speed . max running speed is 200-300m/min.

Base you will choose the paper width is1200- 1800mm.

One hour working of the machine can produce about 1.3tons of paper.

Normal working hours in one day are about 12 hours.

So the daily quantity is almost 16 tons.

Fifth, you mention the jumbo paper roll slitting and rewinding machine

Important staff is your factory area is enough for these machine